Front Panel Ui And Menu; Main Display Messages; Using The Front Panel Ui - Acuity Brands Lighting Pathway VIA 12 Series User Manual

FRONT PANEL UI AND MENU

The VIA12 models 6750, 6750-P, 6752-P and 6754-P feature a front panel UI, consisting of an LCD and a rotary pushbutton
encoder for navigating menus and selecting options.
If configuring the switch via a PC and Pathscape is not possible or practical, it is still easy to do using the front panel UI. This
section will show the menu structure and descriptions of menu options.

MAIN DISPLAY MESSAGES

When idle, the main LCD will show the switch soft label (Name) and its IP address. If the Ring Protect feature is enabled, it
will also display status of the Ring.

USING THE FRONT PANEL UI

With the main screen (above) showing on the LCD, press in the encoder knob. The base configuration menu will be shown.
Turn the knob to scroll up or down the menu. The currently selected menu item is shown in
knob to enter sub-menus. Top-level menu entries are shown above.
For all menus and submenus, the current selection will be highlighted in
further options, or to select the currently selected item. If choosing from a list of options, the currently enabled option will be
shown with asterisks on either side of it, e.g.
REV 1.0 • June 2020
Rotary Encoder
Turn to Highlight
Push to Select
TM
RACK VIA12 #1
IP: 10.30.142.169/8
Ring Protect Master: OK
Base Configuration
Network Setup
Device Info/Status
Advanced Settings
Admin/Security
<Back>
*
Current Property Value
VIA12 [6750, 6750-P, 6752-P, 6754-P] - Manual
LINK/ACT
PORT 1 PORT 2
White on Black
White on Black
. Push the encoder knob to reach
*
.
PORT 3 PORT 4 PORT 5 PORT 6
. Push the
40