Table of Contents
Advertisement
PoE PROPERTIES
Property
PoE
PoE Status
PoE Active Draw (W)
PoE Power Allocation (W)
PoE Max Allocation
PoE Power Cycle
37
(NOT SHOWN ON VIA12 MODEL 6750)
Enabled by default, this option allows the user to completely disable PoE on a given
port. Any PoE allocation set with the following parameter will be ignored. Ports 1-12
only.
The PoE class as reported by connected device. Read-only.
Not Detected: not a PoE device
Class 0: No class reported, 15.4W draw assumed
Class 1: Uses up to 4W
Class 2: Uses up to 7W
Class 3: Uses up to 15.4W
Consumption as reported by the PoE controller, in watts.
Reports the maximum draw, in watts, allowed by the PoE class, or the limit set by the
user, whichever is less.
Sets the PoE allocation for the port. Default is 15.4W, regardless of the size of the
power supply.
Allocation options range from 0.9W to 15.4W, in 900mW increments.
Pressing this button will disable and then re-enable PoE on the selected port, in order
to power cycle the end device.
VIA12 [6750, 6750-P, 6752-P, 6754-P] - Manual
Description
REV 1.0 • June 2020
Advertisement
Table of Contents
