Software (Pathscape) Configuration; Network Setup - Acuity Brands Lighting Pathway VIA 12 Series User Manual

SOFTWARE (PATHSCAPE) CONFIGURATION

Wherever possible, we recommend using a PC with Pathscape to configure your VIA switch(es). For in-depth information on
using Pathscape, see the Pathscape manual. Pathscape is available for macOS and Windows from the Software section of
our website: https://www.pathwayconnect.com/index.php/products/software/176-pathscape. Use the QR Code below to
visit the download page.
If using a PC with Pathscape is not possible or practical, see the section Front Panel UI and Menu later in this manual.

NETWORK SETUP

PLEASE NOTE: Before any configuration and network setup can be done, including setting the IP, the VIA
switch(es) must be added to a Security Domain. If the device is not added to a Security domain, it will not be
possible to configure any properties.
From the factory, the VIA12's IP address is static, and set to 10.X.X.X (where X is between 0 and 254), with a subnet mask
of 255.0.0.0 and a default gateway of 10.0.0.1. Before any additional configuration, set the devices' IP address to the same
subnet and IP range as the computer and other devices on the lighting network.
Additionally, the VIA12's name in the device list will be shown as its IP address. Give it a useful name before continuing.
15
VIA12 [6750, 6750-P, 6752-P, 6754-P] - Manual REV 1.0 • June 2020