Download Print this page
SECO-LARM ENFORCER SD-962AR-36M Installation Manual
SECO-LARM ENFORCER SD-962AR-36M Installation Manual

SECO-LARM ENFORCER SD-962AR-36M Installation Manual

Modern flat rim-type exit bar

Advertisement

Quick Links

Installation Manual
SD-962AR-36M
Modern Flat Rim-Type Exit Bar
Features:
Sturdy aluminum construction.
Allows exit from inside while locked from outside.
Reversible non-handed design.
For metal or wood doors up to 1
What It Does:
SECO-LARM's SD-962AR-36M exit device, when mounted on the inside of a door to block entry to a protected premises,
securely locks the door from outside access while allowing users inside the protected premises to exit. The hardy
aluminum enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require
exit. It can be connected to a rim cylinder lock on the outside of the door in order to allow entry by authorized personnel.
Dimensions:
2
/
"
5
8
(67mm)
/
"
11
16
(18mm)
7
/
"
1
2
(190mm)
/
" thick.
3
4
22"
(559mm)
35
/
" (892mm)
1
8
Includes all needed hardware for typical
installation.
Works with rim cylinder locks (not included).
Fits doors from 36" to 48" wide.
1
/
"
5
8
(42mm)
3
/
"
1
8
(80mm)

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENFORCER SD-962AR-36M and is the answer not in the manual?

Questions and answers

Summary of Contents for SECO-LARM ENFORCER SD-962AR-36M

  • Page 1 What It Does: SECO-LARM’s SD-962AR-36M exit device, when mounted on the inside of a door to block entry to a protected premises, securely locks the door from outside access while allowing users inside the protected premises to exit. The hardy aluminum enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require exit.
  • Page 2 ” Door Door Rim Cylinder Rim Cylinder Double Door with Mullion Exit device Exit device ” Door Door Rim Cylinder Rim Cylinder Rim Cylinder Double Door without Mullion Exit device Exit device ” Double-door strike (not included) SECO-LARM U.S.A., Inc.
  • Page 3 Then mark the position of the mounting holes for the latch assembly. See fig. 5. 3. Move the template against the door stop and then mark the mounting holes for the strike. 4. Drill the holes as marked on the door and the mullion. See fig. 6. SECO-LARM U.S.A., Inc...
  • Page 4 This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship.