Intermec CN51 User Manual page 28

Field Definitions for MobileDocumentImaging_Config.xml (continued)
Field Name
fieldType
displayName
defaultValue
28
Valid Values Description or Notes
AN, NUM, or DT Users can enter alphanumeric characters up to
the maxLength specified.
If this is set to NUM, the user can enter only
numeric values up to the maxLength specified.
If this is set to DT, the application displays a
Date Picker control used.
Default is AN.
Character string This value is used to display as the label on the
up to 30 screen for the input value. It is also used in the
characters. .txt file eMDI creates if includeTextFile is set to
true.
Should follow the If one defaultValue is included, the application
minLength, displays a text or date entry field with the
maxLength, and defaultValue displayed. Users are allowed to
fieldType that are change it, and if more than one defaultValue is
set. included, the user is able to pick from a list of
included values (the default is empty).
If no default value is included, the user is
required to enter a value if Entry Required is
included.
Enhanced Mobile Document Imaging (eMDI) User Guide