Intermec CN51 User Manual page 19

General eMDI Settings (continued)
Setting
On Capture
Record Location
Torch
Flash
eMDI Conditioning Settings
Setting
Contrast
Enhancement
Text Enhancement
Perspective
Correction
Lighting Correction
Noise Reduction
Rotation
Enhanced Mobile Document Imaging (eMDI) User Guide
Description
Sets the computer action when a document image is captured. Default is
one beep.
Saves location data to .jpg files. If you enable Record Location when
Location Services is not enabled, you are prompted to reboot the
computer, and eMDI restarts with Record Location enabled. Default is
disabled.
Record Location is not available on the CN4 series mobile computers.
Uses the LED flash to illuminate the document, which helps capture
document images in low-light areas. It can be set to on, off, or auto.
Default is off.
Torch is only available on CN51 and 70 Series mobile computers.
Uses the LED flash to illuminate the document, when the image is
captured. It can be set to on, off, or auto. Default is off.
Flash is only available on CN51 and 70 Series mobile computers.
Description
Adjusts the contrast settings of the document image. Default is black text
on a white background.
Enhances the text in a document image. Increasing Text Enhancement
between black text and a white background can make text more readable,
but a high contrast level can induce visual noise. Default is low.
Corrects the angle at which the document image is captured. Default is
enabled.
Corrects lighting in document images where the edges are darker than the
middle. Default is disabled for the camera and enabled for the EA21
imager.
Reduces the noise in a document image. Increase this setting, to increase
the filtering. If this setting is too high, it may blur the document image.
Range is 0 to 9. Default is 2 for the camera and 0 for the EA21 imager.
Rotates the document image when it is saved. Default is 0 degrees.
19