Emerson Dixell E2 Quick Start Manual page 7


3. Press to open the Controller Associations menu.
4. Select the XM Circuit.

5. Press to confirm.
6. Select the XM678D device to be associated to the XM circuit.

7. Press (LOOK UP).

8. Press to confirm.
9. The XM678D device is now associated to the XM Circuit.
10. Repeat this process for other XM678D controllers.

11. Press to confirm and save changes.

12. Press to go back to the Home screen.
Document Part # 026-4240 Rev 0 10-FEB-2015
©2015 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
Figure 11 - Controller Associations Menu
Figure 12 - XM678D Device Selection
Page 7 of 9