Emerson Dixell E2 Quick Start Manual page 4

2. Press to highlight the XM678D controller to be commissioned and press
3. If a Select Network box appears on the screen, select the MODBUS number where you configured the
device and press
4. Select the address for the device and press
Note: The MODBUS device address must be the same as the address assigned on the device.
Document Part # 026-4240 Rev 0 10-FEB-2015
©2015 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
Figure 5 - Network Summary Screen

.
Figure 6 - MODBUS Device Address

.

.
Page 4 of 9