Gblayout --Set-Sequence; Gblayout --Get-Sequence - Hall Technologies HT-MERCURY Command List

MERCURY is enabled to change the screen layout automatically.
Ø
position and size of every window and the video source displayed in the
window.
Example 1:
To display basic information of the current screen layout:
Command:
gblayout --get
Response:
Layout #: 0x0101
Example 2:
To display more detailed information of the current screen layout:
Command:
gblayout --get detail
Response:
Layout #: 0x0101
1 0
2 8000

2.3.7 gblayout --set-sequence

Command gblayout --set-sequence Layout1No [Layout2No [ Layout3No ]]...
Response The screen layout sequence is updated according to the command
This command is used to designate the screen layout sequence, which
Description
with the HT-MERCURY, is either full screen or dual view.
Example 1:
The below command disables the multivew feature:
Command:
gblayout --set-sequence 0x0100
Example 2:
The below command enables the multivew feature with up to dual view
Command:
gblayout --set-sequence 0x0100 0x101

2.3.8 gblayout --get-sequence

If this part of the command is used, the HT-MERCURY prints the
2 windows auto
Name:layout1 2 windows
2250 8000 4500
2250 8000 4500
[HDMI1]
[HDMI2]
26