Hall Technologies HT-MERCURY Command List page 12

Description This command displays the zoom the camera is set to.
Example:
To display what the camera's zoom is set to:
Command:
gbconfig -s camera-zoom
Response:
100
If the zoom is set to 100.
2.1.8 gbconfig --camera-savecoord
Command gbconfig --camera-savecoord {1 | 2}
Response Current coordinates of the camera will be stored to preset 1 or preset
2.
Description Save current coordinates to a specified preset for easy recall.
Example:
To set current coordinates to preset 1:
Command:
gbconfig --camera-savecoord 1
Response:
The current coordinates of the camera will be saved to preset 1.
2.1.9 gbconfig -s camera-savecoord
Command gbconfig -s camera-savecoord {1 | 2}
Response true/false
This command allows you to see if the current coordinates of the
camera are saved to a certain preset.
•
Description
•
preset.
Example:
To see if the current coordinates are saved to preset 1:
Command:
gbconfig -s camera-savecoord 1
Response:
true
The coordinates are saved to preset 1.
True: The coordinates have been saved to the specified preset.
False: The coordinates have not been saved to the specified
11