Hall Technologies HT-MERCURY Command List page 11

Command:
gbconfig –camera-mode autoframing
Response:
The camera's tracking mode will be set to autoframing.
2.1.5 gbconfig -s camera-mode
Command gbconfig -s camera-mode
Response {normal | autoframing | speakertracking | presentertracking}
Description Display camera's tracking mode.
Example:
To display the camera's tracking mode:
Command:
gbconfig -s camera-mode
Response:
normal
This indicates that the tracking mode is set as "normal".
2.1.6 gbconfig --camera-zoom
Command gbconfig --camera-zoom {[100, gbconfig -s camera-phymaxzoom]}
Response The camera's zoom will be changed.
Set the camera's zoom. The available values range from 100% (1x) to
the camera's maximum physical zoom.
Description
For the HT-MERCURY the camera's maximum physical zoom is 500
and so the available range of the zoom is [100, 500] (1x to 5x)
Example:
To set the camera's zoom to 100:
Command:
gbconfig --camera-zoom 100
Response:
The camera's zoom will be set to 1x.
2.1.7 gbconfig -s camera-zoom
Command gbconfig -s camera-zoom
The response will be the number the zoom is set to (between 100 and
Response
500)
10