Gbcontrol --Reset-Web-Passwd; Gbcontrol --Video-Source; Gbcontrol --Audio-Source; Gbcontrol --Stop-Video - Hall Technologies HT-MERCURY Command List

2.2.4 gbcontrol --reset-web-passwd

Command gbcontrol --reset-web-passwd
Response The HT-MERCURY's web password will be reset to default.
This command restores the HT-MERCURY's Web UI password to the
Description
factory default (admin).
Example:
To reset the Web UI password of the HT-MERCURY to the factory default:
Command:
gbconfig --reset-web-passwd
Response:
The Web UI password is reset to the factory default.

2.2.5 gbcontrol --video-source

Command gbcontrol --video-source VideoName [ WinNo ]
Response The device displays the video source with the designated mode.
Description This command displays the selected video source.

2.2.6 gbcontrol --audio-source

Command gbcontrol --audio-source VideoName
Response The device plays the audio of the designated video source.
Description This command selects the desired audio source.

2.2.7 gbcontrol --stop-video

Command gbcontrol --stop-video {VideoName}
The device stops displaying the designated video, then prints a list of
Response the
video sources which are displayed.
This command makes the HT-MERCURY stop displaying a specified
Description
video source.
Example:
To stop HDMI2 when it is currently being displayed:
Command:
gbconfig --stop-video HDMI2
Response:
22