Hall Technologies HT-MERCURY Command List page 10

This command sets the number of cascaded expansion HT-Satellite-
Description
EXT microphones
Example:
To set total number of connected HT-Satellite-EXT microphones to 3:
Command:
gbconfig --cascade-mic-num 3
Response:
The total number of microphones connected is set to 3.
2.1.3 gbconfig --get-cascade-mic-online-num
Command gbconfig --get-cascade-mic-online-num
Response 0-7
This command displays the total number of HT-Satellite-EXT
Description
microphones connected to the HT-MERCURY.
Example:
To display the total number of expansion microphones connected:
Command:
gbconfig --get-cascade-mic-online-num
Response:
1
One expansion microphone is connected to HT-MERCURY.
Camera:
2.1.4 gbconfig --camera-mode
Command gbconfig --camera-mode {normal | autoframing | speakertracking |
presentertracking}
Response The device name will change to the specified tracking mode.
Set camera's tracking mode to the following:
•
•
on face recognition.
Description
•
based on speech recognition.
•
Example:
To change the name to autoframing:
normal: Users adjust the camera's pan, tilt, and zoom manually
autoframing: The camera automatically tracks the people based
speakertracking: The camera automatically tracks the speaker
presentertracking: The camera tracks a single presenter.
9