Gbcontrol --Show-Osd; Gblayout Commands; Gbcontrol --Device-Info; Gblayout --Help - Hall Technologies HT-MERCURY Command List

The device will stop displaying video connected into HDMI2.

2.2.8 gbcontrol --show-osd

Command gbcontrol --show-osd
Response The HT-MERCURY displays the OSD for ten seconds.
This command displays the OSD for ten seconds. This allows users to
Description see the OSD for access code or soft AP password when video is
displayed. After 10 seconds the OSD will disappear.
Example:
Command:
gbcontrol --show-osd
Response:
The device shows all OSD items for ten seconds.

2.2.9 gbcontrol --device-info

Command gbcontrol --device-info
Response The HT-MERCURY displays the model and firmware version
This command shows information about the device and firmware
Description
version.
2.3

gblayout Commands

2.3.1 gblayout --help

Command gblayout --help
Response A simple description of the gblayout command is shown.
Description Shows a simple guide of all available gblayout commands

2.3.2 gblayout --start-video

Command gblayout --start-video VideoName
The device starts to display the designated video source, then prints a
Response list
of the video sources which are displayed.
23