Hall Technologies HT-MERCURY Command List page 18

gbconfig -s cec-cmd
Response:
HDMI ON: 4004
HDMI OFF: ff36
Displays the saved CEC commands for turning on and off the display.
2.1.23 gbconfig --send-cmd hdmi
Command gbcontrol --send-cmd hdmi {CmdStr}
Response The CEC command {CmdStr} will be sent to the display for testing.
This command tests CEC commands {CmdStr} to turn the display on or
off.
Description
Note: This command is only for testing and is not saved on the HT-
MERCURY.
Example:
To test the CEC command "44 04" to the display
Command:
gbcontrol --send-cmd hdmi 4004
Response:
The CEC command "40 04" will be sent to the display.
Audio:
2.1.24 gbconfig --mic-mute
Command gbconfig --mic-mute {n | y}
Response All microphones will be set as mute on/off.
Set all microphones, including the array microphones and connected
expansion microphones to mute on/off.
Description
•
•
Example:
To mute all microphones:
Command:
gbconfig --mic-mute y
Response:
All microphones will be muted.
n: mute off.
y: mute on.
17