Hall Technologies HT-MERCURY Command List page 16

The HDCP of HDMI out is turned off.
2.1.18 gbconfig --cec-enable
Command gbconfig --cec-enable
Response The CEC will be turned on or off.
Set the CEC on/off
•
Description
•
Example:
To turn on CEC:
Command:
gbconfig --cec-enable y
Response:
CEC will be turned on.
2.1.19 gbconfig -s cec-enable
Command gbconfig -s cec-enable
Response n/y
Show the CEC status
•
•
Description
•
be unavailable, and the switching between normal mode and standby
mode will be disabled as well.
Example:
To see the CEC status:
Command:
gbconfig -s cec-enable
Response:
y
CEC is turned on.
2.1.20 gbconfig --sinkpower
Command gbconfig --sinkpower {on | off}
Response The CEC command for controlling the display on/off will be sent from
HDMI out to the connected display.
Description To send a CEC command for turning on/off a display:
n: Turn off CEC.
y: Turn on CEC.
n: CEC is off.
y: CEC is on.
Note: Once CEC is off, the command "gbcontrol –sinkpower" will
15