Intended Use And Environment; Figure 3: Main Dimensions Of The Device; Figure 4: Pin Configuration Ivas-Eth Referring To Din En 61076-2-109 - Bosch IVAS Operating Instructions Manual

Figure 3: Main dimensions of the device

10 Mbits/sec, 100 Mbits/sec, 1000 Mbits/sec, Twisted Pair
4 5
1: TXD1+
3 6
2: TXD 1-
2 7
3: RXD2+
1 8
4: RXD2-

Figure 4: Pin configuration IVAS-ETH referring to DIN EN 61076-2-109

2.2 Intended use and environment

The IVAS-ETH is CE marked and is in conformity with the essential requirements of 2014/30/EU (EMC Directive) for the
intended use conditions, environments, and installation conditions described in the following:
Note: Use of IVAS-ETH for control of machinery under the aspect of functional safety is not authorized and voids
the validity of the Declaration of Conformity (DoC). It is not allowed to integrate the IVAS-ETH in controls of
machinery (e.g. for an emergency switch-off or regulation of machine revolutions)
Note: Use of IVAS-ETH in environments different from those listed below, is not authorized and voids the validity OBERFLÄCHENGÜTE:
of the CE DoC.
The IVAS-ETH shall be used for vibration monitoring purposes in the following environments or in physical connection with
NAME SIGNATUR
the listed machinery:
Industrial as specified in EN61000-6-2 and EN61000-6-4, including
 industrial areas indoor and outdoor (non-military)
 industrial locations characterized by the presence of
4
6,6 (2x)
5: BID4+
6: BID4-
7: BID3-
8: BID3+
DATUM
WERKSTOFF:
GEWICHT:
3
ENTGRATEN
UND SCHARFE
KANTEN
BRECHEN
BENENNUNG:
ZEICHNUNGSNR.
ivas-eth_gesamt_v03-asm
MASSSTAB:1:1
36
ZEICHNUNG NICHT SKALIEREN
2
ÄNDERUNG
A4
6
BLATT 1 VON 1
1
E
D
C
B
A