Linksys Etherfast EF1704 User Manual page 48

Subnet Information
The Subnet Information screen, shown in Figure 6-79, displays information
about the IP interface for VLANs configured on this Switch.
• IP Address - The IP address associated with the specified VLAN inter-
face.
• Subnet Mask - A template that identifies the address bits in the host
address used for routing to specific subnets.
• VLAN - The VLAN associated with this IP interface.
• (Ports) - The ports on the Switch.
Read the numbers vertically; they range from 1-8. For each port
number, there are two choices: "S" or "P." Use the spacebar to
scroll through the choices.
The letter "S" indicates a static entry.
The letter "P" indicates the port is a static entry, and the port's PVID
is set to this VLAN ID.
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the next
page. To display a specific page, set the page number in the Page field and then
press Apply.
89
Instant EtherFast
Figure 6-79
Series EtherFast Layer 3 Management 4-Port Gigabit Ethernet Switch
® ®
ARP Table
The ARP Table, shown in Figure 6-80, shows the IP-to-MAC addresses dis-
covered by ARP.
• IP Address - IP addresses for which ARP has resolved the physical
address through a broadcast message.
• MAC Address - MAC address that maps to the corresponding IP
address.
• VLAN - The VLAN group this host has been assigned to.
• Port - The port this host device is attached to.
Select OK to return to the previous panel. Select First Page to view the first
page. Select Next Page to view the next page.
Routing Table
The Routing Table, shown in Figure 6-81, lists the routes through which all
recognized Ethernet networks (and corresponding VLAN) can be reached.
• Destination Network - A destination network, subnet, or host.
• Destination Mask - The subnet mask that specifies the bits to match.
Figure 6-80
90