Device Control Menu - Linksys Etherfast EF1704 User Manual

Configuration File
The Configuration File screen, shown in Figure 6-17, allows you to load a con-
figuration file on any Switch on the network.
• Station IP - IP address of the Switch you want the configuration file to
be sent to.
• Operation - Gives you the choice of downloading the configuration file
from your Switch.
Download from switch - Downloads the current switch configura-
tion to a file on the client PC.
Upload to switch - Uploads a configuration file to the Switch from
the client PC.
Select Start to begin the download. Select Cancel to cancel the download.
27
Instant EtherFast
Figure 6-17
Series EtherFast Layer 3 Management 4-Port Gigabit Ethernet Switch
® ®

Device Control Menu

The Device Control Menu, shown in Figure 6-18, is used to control a broad
range of functions, including port mode, port mirroring, port trunking,
Spanning Tree, VLANs, IP subnets, multicast filtering, and routing protocols.
Note: This screen shots shows the Device Control Menu displayed by a multi-
layer switch.
• Layer 2 Menu - Configures port communication mode, mirror ports, and
port trunking.
• Bridge Menu - Configures the Spanning Tree Protocol for the bridge or for
specific ports, GMRP and GVRP for automatic registration of multicast and
VLAN groups, traffic class priority threshold, and address aging time.
• VLAN Menu - Configures VLAN settings for specific ports and defines the
port membership for VLAN groups.
• IP Menu - Configures the subnets for each VLAN group, global configura-
tion for unicast and multicast routing protocols, and IGMP snooping. (Only
displayed for multilayer mode)
• Security Menu - Configures security settings.
• Jumbo Packet Menu - Allows the administrator to configure the default
packet size sent and received by the Switch.
Figure 6-18
28