Linksys Etherfast EF1704 User Manual page 31

• OSPF Host Router Configuration - Defines a main route of OSPF
to connect to other areas.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.
IP Menu: OSPF Area Configuration
The IP Menu: OSPF Area Configuration screen, shown in Figure 6-45,
allows you to configure the Area ID parameters.
• Area ID - Allows you to assign an algorithm.
• Type - Select the Area Type. "Standard" means that AS-External-
LSAs are included in the area. "Stub" means that AS-External-LSAs
are excluded from the area.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes. Select Prev Page to view the previous
page. Select Next Page to view the next page. To display a specific page, set
the page number in the Page field and then press Apply. Select Add to add an
area.
55
Instant EtherFast
Figure 6-45
Series EtherFast Layer 3 Management 4-Port Gigabit Ethernet Switch
® ®
OSPF Area Configuration: Add OSPF Area
The OSPF Area Configuration: Add OSPF Area screen, shown in
Figure 6-46, allows you to add an area.
• Area ID - The ID of the OSPF area.
• Stub - The type of the OSPF area.
Select OK to return to the previous panel. Select Cancel to cancel any changes.
Figure 6-46
56