Linksys Etherfast EF1704 User Manual page 12

Layer 3 management 4-port gigabit ethernet switch instant etherfast series

Hide thumbs Also See for Etherfast EF1704:

Table of Contents

Enlarged version

Network Configuration

The Network Configuration menu, shown in Figure 6-7, allows you to test IP

connectivity with other nodes on your network or enable the on-board Web

management.

• IP Connectivity Test (Ping) - Tests IP connectivity to a specified device. You

can plug in a workstation on the network to check for connectivity.

• HTTP Configuration - Allows the admin to enable or disable the Web

administration feature of the Switch.

Select OK to return to the previous panel.

Instant EtherFast

Figure 6-7

Series

EtherFast

Layer 3 Management 4-Port Gigabit Ethernet Switch

IP Connectivity Test (Ping)

The IP Connectivity Test, shown in Figure 6-8, is used to see if another site

or node on the network can be reached.

Address - IP address of the device you want to ping.

• Test Times - The number of ICMP echo requests to send to the specified

site. Range varies from 1 to 1000.

• Success/Failure - The number of times the specified site has responded—

or not—to a ping request.

Note: There is a 10-second interval between pings.

Select Start to begin the test. Select Cancel to cancel the test.

Figure 6-8

•

I P

Table of Contents