Page 2
Follow the steps below to perform the Out Of the Box Test. Step 1 - Attach the 60W 56V DC Gigabit PoE Injector and power adapter to the local single port 865XS PRO unit and power up the unit. The Power LEDs will indicate the injector and 865XS PRO unit is receiving power.
Page 3
Connect your local Ethernet LAN to the 60W 56V DC Gigabit PoE Injector and your remote PoE device/s to the remote 865XS PRO LAN ports and test connectivity. Green Blink rapidly when it sees the partner unit indicates working connection – Green No LED indicates it cannot see the partner unit.
Page 4
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
Page 5
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 6
7:00 a.m. and 5:00 p.m. PST and otherwise fully comply with Enable-IT’s then-current RMA policy; (2) return the Product to Enable-IT in its original packaging freight pre-paid; and (3) provide to Enable-IT the original receipt or bill of sale establishing the date on which the Product was purchased.
Need help?
Do you have a question about the 865XS PRO and is the answer not in the manual?
Questions and answers