Page 2
Ethernet LAN Patch cords provided – as shown by the green line connecting the ports in the diagram above. Step 4 - Attach your high powered PoE PTZ camera to LAN 1 on the 865QW PRO CPE unit. Once all of the network devices are connected to our extenders, apply power to the 375 PoE Injector last.
Page 3
Step 5 - For a more detailed test and to confirm your LAN & PoE Equipment works with the 865QW PRO extender, connect your long distance Ethernet cabling between the interlink ports and attach your LAN devices on each end of the run.
Page 4
Attach your local LAN to the 865QW PRO CO LAN ports with Ethernet patch cord provided. Attach the power adapter to the 865QW PRO CO unit and the 375 PoE Injector for powering the 865QW PRO CPE unit..
Page 5
Attach your local LAN device to the LAN data IN port on the 375 Injector and another patch cord from the Data / PoE Out port on the injector to the LAN 1 port on the 865QW PRO CO unit.
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
Page 7
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 8
USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 865QW PRO and is the answer not in the manual?
Questions and answers