Enable-IT 865 Q PRO Quick Start Manual

Enable-IT 865 Q PRO Quick Start Manual

Professional grade poe extender kit

Advertisement

Quick Links

!
Enable-IT 865 Q PRO Gigabit
Professional Grade PoE Extender Kit
Quickstart Guide
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 865 Q PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for Enable-IT 865 Q PRO

  • Page 1 Enable-IT 865 Q PRO Gigabit Professional Grade PoE Extender Kit Quickstart Guide All Rights Reserved © 1997 - 2017 Enable-IT™, Inc.
  • Page 2 Next run another Ethernet patch cord from LAN2PoE on the 865 PTZQ PRO CO to LAN2/ PoE on the 865 Q PRO CPE. Next you will need to connect your IP camera to the LAN1/ PoE port on the 865 Q PRO CPE. 
...
  • Page 3 Power – Green Solid LED indicates the unit is receiving 12V power Performing the On-Site Installation After removing the Enable-IT 865 Q PRO PoE Extender Kit from the box, and performing the Out Of The Box Testing (OOTBT), all that remains to install the unit on-site is to mount the unit, build the interconnect wiring, add voice lines if needed, and attach the LAN device cabling with the provided Ethernet Patch cords.
  • Page 4 Attach the power adapters to both 865 Q PRO units. Attach your local Interlink cabling end to the 865 Q PRO CO unit Interlink port – Then do the same for the remote end and plug into the 865 Q PRO CPE unit Interlink port. The Sync LED’s will flicker in a sequence talking to each other until they go solid.
  • Page 5 Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
  • Page 6 AND EXCLUSIVE REMEDY FOR BREACH OF THE FOREGOING WARRANTY. c. Conditions for Warranty Qualification. If authorized by Enable-IT to return a Product which does not conform to the warranty set forth above, the End User must: (1) obtain a return materials authorization (RMA) number from Enable-IT by contacting the Customer Service Dept.
  • Page 7 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...

Table of Contents