Page 2
Step 3 - Next for a more detailed test and to confirm your PoE Equipment works with the 865XC PRO, connect your Ethernet LAN to the 865XC PRO CO unit LAN ports and the remote device/s to the 865XC PRO CPE LAN ports and test connectivity.
Page 3
Attach the power adapters to both 865XC PRO units. Attach your local Interlink cabling end to the 865XC PRO CO unit Interlink port – Then do the same for the remote end and plug into the 865XC PRO CPE unit Interlink port. The Sync LED’s will flicker in a sequence talking to each other until they go solid.
Page 4
First examine the backbone wiring pair and make sure you have solid connections. The Interlink Sync LED will be lit solid Green with rapid pulsing on each 865XC PRO unit to show proper connection and pairing. If the Interlink Sync LED Link is flashing slow to fast and never goes solid….
Page 5
1.ENABLE-IT PRODUCT WARRANTY. a. Express Warranty. Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, for the limited lifetime period commencing on the date the Product was purchased (the “Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
Page 6
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 7
2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 865XC PRO and is the answer not in the manual?
Questions and answers