Table of Contents
Advertisement
10 Finishing the outdoor unit installation
10.1 To finish the outdoor unit installation
10.2 To close the outdoor unit
RXF50~71D5V1B
R32 split series
4P519439-18T – 2022.06
DANGER: RISK OF ELECTROCUTION
▪
Make sure that the system is earthed properly.
▪
Turn OFF the power supply before servicing.
▪
Install the switch box cover before turning ON the power supply.
NOTICE
It is recommended that the refrigerant piping between indoor and outdoor unit is
installed in a ducting or the refrigerant piping is wrapped with finishing tape.
1 Insulate and fix the refrigerant piping and cables as follows:
d
c
a
b
g
a Gas pipe
b Gas pipe insulation
c Interconnection cable
d Field wiring (if applicable)
e Liquid pipe
f Liquid pipe insulation
g Finishing tape
2 Install the service cover.
NOTICE
When closing the outdoor unit cover, make sure that the tightening torque does NOT
exceed 1.3 N•m.
10
Finishing the outdoor unit installation
|
e
f
3×
1
2
1
2
2
Installer reference guide
53
Advertisement
Table of Contents
