Table of Contents
Advertisement
9.2 To connect the electrical wiring to the outdoor unit
RXF50~71D5V1B
R32 split series
4P519439-18T – 2022.06
Component
Earth leakage circuit breaker
(a)
Electrical equipment complying with EN/IEC 61000-3-12 (European/International Technical
Standard setting the limits for harmonic currents produced by equipment connected to
public low-voltage systems with input current >16 A and ≤75 A per phase).
1 Remove the service cover. See
2 Remove the switch box cover.
3 Strip insulation (20 mm) from the wires.
a
a Strip wire end to this point
b An excessive strip length may cause electrical shock or leakage
4 Open the wire clamp.
5 Connect the interconnection cable and power supply as follows:
a
a Interconnection cable
b Power supply cable
c Circuit breaker
d Residual current device
e Power supply
f Earth
MUST comply with applicable legislation
"6.2.2 To open the outdoor
2
1
1
2×
b
b
c
d
f
9
Electrical installation
|
unit" [
4
29].
50 Hz
220-240 V
e
Installer reference guide
51
Advertisement
Table of Contents
