Fan Speed Offset - S&P MULTI-REG CONTROL 2841 Series Manual

6.13.

FAN SPEED OFFSET

Operation:
The fan speed offset works when you alter the 'Off-set Output 2' potentiometer, this will allow you to
alter the fan 2 output by +3V or -3V; this is limited by the minimum output 3V and maximum output
10V.
If a 7V supply is required by fan 1 and a 4V supply is required by fan 2 then you will alter the Off-set
Output 2' potentiometer anti-clockwise.
If a 7V supply is required by fan 1 and a 10V supply is required by fan 2 then you will alter the Off-
set Output 2' potentiometer clockwise.
Page 21 of 24