5. FAN WIRING
This basic wiring must be followed for every installation!!!
L – Live
N – Neutral
E – Earth
Fault monitoring (Tacho)
To monitor the status of fan change TACHO jumpers from 'OFF' to 'ON'.
If you are using 'FAN 1 O/P' change TACHO 1 to 'ON'
If you are using 'FAN 2 O/P' change TACHO 2 to 'ON'
NOTE! If the fan does not have a tacho output then the jumper should remain in the "OFF" Position.
Page 8 of 24