Continuous Running With Two Optional Speeds Via External Switched 230V Supply - S&P MULTI-REG CONTROL 2841 Series Manual

6.7.

CONTINUOUS RUNNING WITH TWO OPTIONAL SPEEDS VIA EXTERNAL SWITCHED 230V SUPPLY

PRIOR TO ENERGISING THE MULTI-REG, THE INSTALLER MUST SET ALL THREE OF THE
SPEED POTENTIOMETERS TO THEIR MINIMUM (FULLY ANTI-CLOCKWISE) POSITION.
Fan speed (0-10V)
The speed is defined by the highest voltage of the two 0 - 10V signals from the external devices; the
minimum output is 3V.
Page 15 of 24