Reversing The Appliance Doors; Ensuring The Door Seals Correctly - Bertazzoni Modern Series User Manual

4. INSTALLATION INSTRUCTIONS

4.6 Reversing the appliance doors

We recommend you seek the help of another
individual to support the doors while you perform
this operation.
1. Remove the upper right hinge cover and hinge
using a screwdriver.
2. Remove the upper door.
3. Remove the middle hinge and its connecting
pin underneath.
4. Remove the bottom door.
5. Remove the bottom right hinge and left plastic
plugs, and remount them on the opposite sides.
20
6. Mount the right upper hinge on the bottom left
corner and install the cover.
7. Remount the doors and hinges, working from
bottom to top (from 1-4).

4.7 Ensuring the door seals correctly

It is normal for the seal to be compressed after
the door has been reversed. With the door closed,
use a hair dryer to expand the seal and fill the gap
between the door and the body of the
appliance. Take care not to hold the hair dryer too
close to the appliance, which could damage the
seal.
A distance of approximately 10 cm should be
suitable. When completed, allow the seal and door
to cool before touching them. Once done, the seal
should remain in position.