Bertazzoni Modern Series User Manual page 11

> The fridge has not been turned off.
> The electrical outlet is functioning properly. To
check this, plug another electrical appliance into
it to see if the outlet is faulty.
If the appliance is working, but not very well,
check that:
> The appliance is not overloaded.
> The thermostat is set to an appropriate
temperature.
> The doors are closing properly.
> The cooling system on the back of the appliance
is clean and free of dust and is not touching the
rear wall.
> There is enough ventilation around the side and
rear walls.
If the appliance is noisy, check that:
> The appliance is level and stable.
> The side and rear walls are clear and there is
nothing resting against the appliance.
NOTE:
The coolant gas in the refrigerator may
make a slight bubbling or gurgling noise,
even when the compressor is not running.
If the appliance is beeping, check that:
> The doors are closed. An alarm will sound after a
door has been open for 60 seconds.
If ice has formed on the back wall of the fridge:
> It is normal for some ice droplets to form on the
back wall of the fridge. This does not constitute a
fault with the appliance.
> Ensure that no items inside the fridge are in
contact with the back wall.
> Check that there is some resistance when
opening the appliance door. If it opens at the
slightest touch, it may mean that the door seal
needs to be replaced.
> Check the door seal for any kinks, debris or
damage. If you notice any, and are unable to
resolve the issue yourself, contact Customer
Care so that the seal can be replaced.
> This can be due to the cabinet door(s) not being
properly fitted. If you are at all unsure, ask your
installer to check the cabinet doors.
If excessive ice has formed in the freezer:
> Check that there is some resistance when
opening the appliance door. If it opens at the
slightest touch, it may mean that the door seal
needs to be replaced.
> Check the door seal for any kinks, debris or
damage. If you notice any, and are unable to
resolve the issue yourself, contact Customer
Care so that the seal can be replaced.
> This can be due to the cabinet door(s) not being
properly fitted. If you are at all unsure, ask your
installer to check the cabinet doors.
If one or more of the LED units inside the appliance
is not working:
> Contact Customer Care to arrange a service visit.
EN
11