Safety; General Causes Of Risk; Personal Protective Equipment - ELGO Electronic LIMAX2 Series Operating Manual

5 Safety

CAUTION!
Please read the operating manual carefully, before using the device! Observe the installation
instructions! Only start up the device if you have understood the operating manual.
The operating company is obliged to take appropriate safety measure.
The initial operation may only be performed by qualified and trained staff.
Selection and installation of the devices as well as their embedding into the controlling system
require qualified knowledge of the applicable laws and normative requirements on the part of
the machine manufacturer.
5.1

General Causes of Risk

This chapter gives an overview of all important safety aspects to guarantee an optimal protection of employees
and a safe and trouble-free operation. Non-observance of the instructions mentioned in this operating manual
can result in hazardous situations.
5.2

Personal Protective Equipment

Employees have to wear protective clothing during the installation of the device to minimize danger of health.
Therefore:
Change into protective clothing before performing the works and wear them throughout the process.
Additionally observe the labels regarding protective clothing in the operating area.
Protective clothing:
PROTECTIVE CLOTHING
... is close-fitting working clothing with light tear strength, tight sleeves and without distant
parts. It serves preliminarily for protection against being gripped by flexible machine parts.
Do not wear rings, necklaces or other jewelry.
PROTECTIVE GLOVES
... for protecting the hands against abrasion, wear and other injury of the skin.
PROTECTIVE HELMET
... for protection against injuries of the head.
- 8 -
Safety