Daily Testing With The Test Rod - Leuze electronic SOLID-2SF-M Original Operating Instructions

Tests
10.3

Daily testing with the test rod

SOLID-2SF multiple light beam safety devices are subjected to cyclical testing. Nevertheless, it is very
important to check the protective field for its effectiveness every day, so as to ensure that the protection
stays effective at all points of the protective field, e.g. even after a parameter or tool change.
Only use an appropriate test rod with
testing!
a = Start of test
Figure 10.1: Testing with the test rod
 LED1 of the receiver must be observed during the testing procedure. If a light beam is interrupted by
the test rod, LED1 must change from "green" to "red".
Leuze electronic GmbH + Co. KG
30 mm (accessory), and NEVER use your fingers, hand or arm for

a
SOLID-2SF-M 31