Responsibility For Safety; Exemption Of Liability - Leuze electronic SOLID-2SF-M Original Operating Instructions

Safety
2.4

Responsibility for safety

Manufacturer and operator must ensure that the machine and the implemented safety sensor function
properly and that all affected persons are adequately informed and trained.
The type and content of all imparted information must not lead to unsafe actions by users.
The manufacturer of the machine is responsible for:
• Safe machine construction
• Safe implementation of the safety sensor
• Imparting all relevant information to the operating company
• Adhering to all regulations and directives for the safe commissioning of the machine
The operator of the machine is responsible for:
• Instructing the operating personnel
• Maintaining the safe operation of the machine
• Adhering to all regulations and directives for labor protection and safety at work
• Regular testing by competent personnel
2.5

Exemption of liability

Leuze electronic GmbH + Co. KG is not liable in the following cases:
• Safety sensor is not used as intended.
• Safety notices are not adhered to.
• Reasonably foreseeable misuse is not taken into account.
• Mounting and electrical connection are not properly performed.
• Proper function is not tested (see chapter 10).
• Changes (e.g., constructional) are made to the safety sensor.
Leuze electronic GmbH + Co. KG SOLID-2SF-M 10