Safety Instructions; Notes On Transport, Installation, Start-Up; General Sources Of Danger During In-House Transportation - Index R300 Operating Instructions Manual

SAfETy INSTRUCTIONS

Notes on Transport, Installation, Start-up

Transport, Installation, Start-up
R300
LR1802.10081 - 06.11.2014
Safety Instructions
Notes on Transport, Installation, Start-up
Use only suitable hydraulic jacks to lift the machine and ad-
equate transport casters or armored rollers with appropriate
carrying capacity for transport.
If the door to the work area is open, the door safety interlock
will remain open after disconnecting the power supply line.
Transport locks can be identified by their red color.
Failure to follow proper procedures for transport, installation and start-up is prone
to cause accidents and may induce damages to or malfunctions of the machine for
which INDEX rejects any liability or warranty.
Prior to delivery of the machine, the procedures for unloading, transporting to the
installation site, installation, and start-up must be carefully planned while absolutely
observing the cautions below in this document.
Associated transport instructions and/or manufacturer documentations exist for
separate units such as chip conveyor, bar feeder, bar loading magazine and similar
devices. These documentations must also be followed without fail.

General sources of danger during in-house transportation

Danger to life!
Do not stand under suspended loads.
Machines must be transported by authorized and qualified personnel only.
Act responsibly when transporting the machine and always consider the conse-
quences. Avoid dangerous and risky actions.
Slopes and gradients (driveways, ramps, etc.) are particularly dangerous. Use extra
care if such passage-ways cannot be avoided.
Ensure secure and proper seating of the cargo. If necessary, use additional fixtures
to ensure that the cargo is not able to slip.
The transport vehicles must be able to produce sufficient traction and braking
forces for safe transport.
5