Delivery; Machine; Pressure Accumulator; Other Separate Units - Index R300 Operating Instructions Manual

TRANSPORT

Delivery

14
Delivery

Machine

The machine will be delivered by a special truck.
The machine will be in the following condition when delivered:
– The hydraulic fluid and lubrication oil tanks will be full.
– The cooling lubricant tank will be empty. (The machine has a chip conveyor with
an integrated cooling lubricant tank or a separate coolant cleaning system. The
chip conveyor and coolant cleaning system are separate units.)
– Certain moving parts on the machine, such as sliding covers and the swiveling
operating panel, are secured by transport locks or were removed.
– Protruding machine parts hampering the transport may have been removed.
– All blank parts of the machine were treated by spray-covering with an anti-rust
agent.

Pressure Accumulator

If the machine was shipped by plane, all accumulators attached to the machine are
depressurized.
Before start-up of the machine, all accumulators must be filled with nitrogen (N
a specialist. The prescribed pressures must be observed.
For the prescribed pressures, see the hydraulic diagrams in Chapter "Working
Documents".

Other Separate Units

Certain options or accessories such as chip conveyor, bar feeder, bar loading maga-
zine, etc. are usually separate units.
Chip conveyors usually rest on a transport base for shipping.
The bar feeder and bar loading magazine are delivered in a special shipping crate.
Loose parts such as keys, tools, and fittings, are supplied in a special box, which
may be included with a separate unit.
Before unloading, check the machine, the enclosed accessories, and any separate
units for external damages and completeness (compare bill of lading with delivery
note).
Have the carrier confirm any damages or missing parts on the bill of lading or
delivery note.
In case of damages during transport, it is recommended to take photos of the
damages for evidence.
Inform INDEX or the INDEX representative.
) by
2
Transport, Installation, Start-up
R300
LR1802.10081 - 06.11.2014