Index R300 Operating Instructions Manual page 21

TRANSPORT
INDEX R300
Unloading the machine with a crane
Transporting the Machine
Kunde: ________________________________________________
Projekt-Nr.: __________________ Masch.-Nr.: ______________
Transport by crane
The round slings used to transport the machine by crane
(a = 3500 mm, b = 3400 mm, and c = 3800 mm) must only be used as specified in this document.
Incorrect use can result in dangerous shifts in the center of gravity, which could cause the machine
to fall.
The round sling (a) is attached to the machine using the hook (d) and a mounting lug with shackle
(e). The round slings (b and c) are directly attached to the lugs provided for this purpose (fig.: X and
Y) on the frame of the machine via the hook (d).
c
b
a
LR2801.00021_01.tif
LR 2802.00021 - 10.07.2014
Transport, Installation, Start-up
R300
0714/SP
LR1802.10081 - 06.11.2014
d
Abb.: X
LR2801.00021_08.tif
Abb.: Y
LR2801.00021_03.tif
LR2801.00021_09.tif
e
LR2801.00021_02.tif
Machine mass
approx. 19000 kg
c
a
b
21