Unloading And Transporting Of Separate Units; Unpack The Accessories And Check Them For Completeness - Index R300 Operating Instructions Manual

TRANSPORT

Unloading and Transporting of Separate Units

Transport, Installation, Start-up
R300
LR1802.10081 - 06.11.2014
Unloading and Transporting of Separate Units
Options or accessories such as chip conveyors, bar feeders, bar loading magazines,
etc. are separate units.
They have dedicated transport regulations that must be observed for unloading and
transporting (see the manufacturer's documentation).
Do not stand under suspended loads.
Minor separate units do not have specific transport regulations.
They either rest on a pallet or are included in the packaging of another unit.
Use suitable transport ropes or belts for unloading and transporting.
Attach the transport ropes or straps making sure they cannot slip and the load is
securely suspended.
Attach the ropes or straps to any eyebolts that are provided for transport.
Unpack the Accessories and Check them for Complete-
ness
After unloading, unpack the machine accessories and check them against the
information on the delivery note for completeness (compare with bill of lading or
delivery note).
In case of discrepancies, contact INDEX or your INDEX representative.
23