Table of Contents
Advertisement
FA1-7012123000203
-> Refresh :
2022-09-16 10:21:32 GMT -6
Model :
FA1-C
SN :
7012123000203
Firmware :
1.2200
Server :
mqtt.solectria.com 1884
Status :
Offline
Internet :
Ethernet
Ethernet Status :
Disconnected
Baud Rate :
9600 N8 1
Modbus ID :
1 - 10
Device Settings
Internet Settings
FA1-7012123000203
-> Refresh :
2022-09-16 10:30:32 GMT -6
Model :
FA1-C
SN :
7012123000203
Firmware :
1.2200
Server :
mqtt.solectria.com 1884
Status :
Online
Internet :
Ethernet
Ethernet Status :
Connected
Baud Rate :
9600 N8 1
Modbus ID :
1 - 10
Device Settings
Internet Settings
Ensuring that the
gateway can connect
to the Internet is the
most important step.
The gateway connects
to the Internet through
4G by default.
if connection to the
Internet via Ethernet is
desired.
select "Ethernet" and
press "Switch".
Enter the correct Ether-
net IP information.
Refresh
Click "Refresh" to
More
check for updated
configuration.
if the "Status" is
"Online", the gateway is
connected to the target
server.
When the gateway
status becomes
"Online", the gateway
will automatically
create related objects
on the portal, and the
administrator can
remotely set the
required parameters.
In this case, it is
assumed that the SIM
Refresh
card is inserted into
More
the gateway.
Page 23
Internet Settings
Select the interface as the channel to the Internet,
and configure the corresponding parameters
after switching.
Ethernet
4G
More information - Ethernet
Ethernet Settings
Static IP Address
IP Address
Subnet Mask
Gateway Address
Auto DNS
More information - Ethernet
Switch
Save
Advertisement
Table of Contents
