Table of Contents
Advertisement
Connect the 3rd party Datalogger to the AUX port in the bottom left-hand corner of
the gateway using the 3-Pin Connector provided in the gateway kit.
RS485 of 3rd Party Data Logger
4
A + / B - / G
RS485 Inverter Daisy Chain
A + / B - / G
Connect the RS485 inverter daisy chain to the inverter communication board using
the 5-Pin Connector provided in the gateway kit.
NOTE: The 5-Pin Connector is installed on the port on the bottom of the inverter
communication board (behind the gateway) .
A+ B- G
Vin GND A+ B- G
The RJ45 LAN cable is inserted into
the Ethernet port of the gateway.
The LAN cable must be able to access
the Internet without port filtering
behind the firewall.
Optional wire
Optional wire
Ethernet Port
Page 16
5
Advertisement
Table of Contents
