Bearing Replacement Instructions - Continental Girbau L28STK30G Owner's Manual

BEARING REPLACEMENT
INSTRUCTIONS
Bearings Replacement Instructions (Illustration)
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Page 33
Remove belt guard, V-belt, spacer and basket
sheave.
Loosen set screws on the flange bearing and on the
pillow block bearing.
Remove the bolts holding the pillow block bearing
and take it off the shaft.
Remove the nuts and washers holding the flange
basket bearing and take it off the dryer.
Inspect the bearings for damage and replace as
necessary, in reverse order of removing them. Before
tightening securely, align basket per instructions on
separate instruction sheet.
Lubrication guide---Bearings never need lubrication.
They have been permanently lubricated by the
supplier with a high temperature grease.