Table of Contents
Advertisement
OPERATING
INSTRUCTIONS—COIN
METER MODELS
ELECTRO-MECHANICAL COIN METER
Operating Instructions—Coin Meter Models
OPERATING INSTRUCTIONS—COIN METER MODELS
1. After loading the dryer with water washed clothes, close the loading
door.
2. ELECTRO-MECHANICAL COIN METER: Insert proper coin(s) in
slot and turn knob until it stops.
COMPUTERIZED COIN METER: Insert coin. Amount of drying
time will appear on the digital display. Maximum time is 99 minutes.
Additional coins may be vended any time during the cycle.
3. Turn temperature fabric selection dial to desired setting:
HIGH—185° F (85° C) exhaust temperature, heavy fabrics and hard
to dry, (cottons and linens).
MEDIUM—150°F (66° C) exhaust temperature, permanent press,
synthetic blends.
LOW—135°F (58° C) exhaust temperature, delicate, sheer fabrics.
4. Press the "Start" button to start the drying and cooling cycles.
WHAT IS HAPPENING AFTER STEP 4:
1. Digital display will count down time remaining in cycle (computerized
coin meter).
2. The fan motor and basket will revolve.
3. The heat source will be energized.
4. The heated air will mix with the wet clothes and evaporate the moisture.
5. The thermostats will operate at a safe temperature.
6. The heat will shut off and the cooling cycle will begin.
DMP SIMPLE MICROPROCESSOR
Page 23
Advertisement
Table of Contents
