Table of Contents
Advertisement
too low
The
temperature
optical cable connector
is too high
5.5.
Transportation
The iM3 Veterinary Laser is susceptible to damage if being banged, dropped,
jarred and jolted. For this reason, do not transport the laser unless it is
wholly packaged inside its original case, with the distal end of the handpiece
body protected with a protective cap.
For long-distance transportation, the case should be packed appropriately,
e.g., put in a box with stuffing fillers. The package should also be kept dry
and water-resistant during transportation.
Transportation requirements:
Temperature: 2-40℃
Relative Humidity: 15% -75%
Atmospheric pressure: 710 hPa to 1060 hPa
A dry and clean environment without corrosive gases
5.6.
Storage
When not in use, the iM3 Veterinary Dental Laser should be stored in a cool
and dry place without dust and shock, as heat, moisture, dust, and
shock cause severe damage to the laser. For long-term storage, please
charge the lithium battery of the base unit to 40%. Remove the
battery of the wireless footswitch. Store the laser in the case.
MAINTENANCE AND SERVICE
laser will not start because the temperature is too
low. Please try to start the laser again by placing the
laser above 5°C.
of
The optical cable connector may be burnt. Contact
us to check and replace the optical cable.
PG 30
Advertisement
Table of Contents
