Installation And Setting Up; Install Power Adapter Or Use Rechargeable Battery - iM3 LAZ010 Instructions For Use And Technical Description

INSTALLATION AND OPERATION
Atmospheric Pressure: 710-1060hPa
WARNING: To avoid the risk of electric shock, this equipment
must be connected to a mains supply with protective earth.
NOTE: Place the iM3 Veterinary Dental Laser on a flat horizontal
plane to
avoid shake.
NOTE: Do not cover or block air vents to ensure enough cooling
of the laser.
2.4.

Installation and Setting Up

2.4.1.

Install Power Adapter or Use Rechargeable Battery

a) Powered by Power Adapter
Connect the power adapter to a wall outlet (100-240VAC, 50-60Hz), and then
insert the DC power connector into the DC IN socket at the back of the base
unit with an arrow marked on the top (Figure 3.5) until it "click" into place.
To disconnect the DC power adapter from the base unit, unplug the power
cord from the wall outlet and grab the connector at the part marked with an
arrow and slowly pull it straight back.
CAUTION: The DC power connector has a snap-locking feature,
helping to prevent accidental disconnection. To unplug from the
socket, grabbing and pulling at the part marked with an arrow is
necessary. Inappropriate or forced plugging may break the
connector.
PG 9