Table of Contents
Advertisement
INSTALLATION AND OPERATION
exist, please contact us or our representative for assistance.
WARNING: Never emit the laser if the aiming beam is not present
or has a significantly different shape.
2.4.8.
Enter READY Mode
Press "READY" button and the laser gets into the READY mode. The status
indicator will show orange light. Now you can activate laser by pressing
wireless footswitch.
NOTE:
STANDBY mode: The laser is not capable of emitting the working
beam even if the wireless footswitch is activated.
READY mode: The READY mode keeps the laser equipment
enabled so that it is capable of emitting laser when the wireless
footswitch is activated.
2.4.9.
Activate Laser by Pressing Wireless Footswitch
In READY mode, the laser is activated when the wireless footswitch pressed,
with a beeping sound indicating that the laser energy is present, and the
orange status indicator begins flashing. Release the footswitch, the laser
stops and the beeping sound disappears. To re-adjust the laser parameters,
please press the "STANDBY" button to back into "STANDBY" mode firstly.
2.4.10. Tip Initiation
Soft tissue has a weak absorption for wavelength of 600-1300nm. The laser
energy cannot be well absorbed by the soft tissue and cannot reach the
PG 15
Advertisement
Table of Contents
