Lexmark W812 Setup Manual page 23

Warning!
Do not exceed the maximum
stack height indicated on the tray.
Overfilling the tray may cause jams.
5
Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the paper.
Straighten the edges of the stack
on a level surface.
6
Place the paper against the back
of the tray, print side up.
Do not load bent or wrinkled
paper.
7
Slide the side guides until they
lightly touch the stack of paper.
8
Squeeze the front guide lever and
slide it back until it touches the
stack of paper. The guide should
be aligned with the correct
indicator for the paper size
loaded.
Make sure the edges of the paper
fit underneath the extension on
the front guide.
Load paper
17