Lexmark Optra C710 Setup Manual page 36

203 mm
(8 in.)
532 mm
203 mm
(21 in.)
(8 in.)
864 mm
(34 in.)
32
Set up the optional drawer unit
2
228 mm
(9 in.)
381 mm
(15 in.)
1445 mm
(57 in.)
Do you need to...
"Install the optional duplex unit", see page 37
Continue with printer setup, see page 33
Place the drawer unit in the location you have cho-
sen for your printer.
The following guidelines will help to ensure proper
printer operation and prevent print quality prob-
lems. They will also extend the life of your printer
and supplies.
Place the drawer unit on a flat, stable surface in a
well–ventilated area.
Leave enough space around the drawer unit for
ventilation and easy access.
Leave space in front of the drawer unit to allow
for easy paper loading. If you plan to install a
duplex unit, leave additional room behind the
drawer unit as well. You will need (507 mm, 20
in.) behind the drawer unit if you plan to install a
duplex option.
Do not place the drawer unit:
– In direct sunlight
– Near heat sources or air conditioners
– In dusty or dirty environments
Use the table below
to locate your next step