Panasonic KX-TGE262C Operating Instructions Manual page 19

unit range. You can set the interval. The
default setting is "1 min".
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
1
MMENUN#632
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone's link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is
brought within the base unit's range during
the auto connection interval, it may
automatically connect to the base unit
(page 18).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
1
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
TGE26x_27xC(en)_1224_ver012.pdf
2
MOFFN
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
Important:
R If you turn on the "Cell line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Cell
line only mode" cannot be activated.
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a
MbN: "Yes" a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
– for the base unit, press MZN instead of
R Once you set this mode, the following
features cannot be used:
– Landline features (page 43)
– Answering system (page 55)
– Voice Mail features (page 62)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
–
19
Link to Cell
instead of MCELLN (page 21).
the line button (MCELL 1N or MCELL 2N)
set for the cellular line selection
(page 20, 27). (KX-TG465SK series:
page 3)
Messages cannot be received.
phones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
will be displayed on the handset
momentarily. The handset can be used
once is displayed.
2013/12/24 15:43:29
N or MZN
19