Download Print this page
Madison Park Arianna Swoop Wing Chair Assembly Instructions

Madison Park Arianna Swoop Wing Chair Assembly Instructions

Advertisement

Quick Links

Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
Parts List
Description
Item
CHAIR
P1
FRONT LEGS
P2
P3
BACK LEGS
Hardware List
Item
H1
Bolts 5/16"x 51mm
H2
Lock Washers 5/16"
H3
Flat Washers 5/16"
Alen Wrench
H4
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Assemble the chair on a flat and soft surface either on a carpet or cloth to prevent the finish from scratching.
Step 1:
To locate the hardware, please turn the chair upside down, you will find the components beneath the fabric cover that is
secured by a Velcro strap underneath the seat cushion. Lift the strap upwards, legs and hardware box could be located
beneath the fabric cover.
ASSEMBLY INSTRUCTIONS
R
Description: Arianna Swoop Wing Chair
Description
QTY
1
2
2
QTY
8
8
8
1
Page 1 of 2

Advertisement

loading

Summary of Contents for Madison Park Arianna Swoop Wing Chair

  • Page 1 ASSEMBLY INSTRUCTIONS Description: Arianna Swoop Wing Chair Important safety instructions: Please read carefully all instructions before assembly. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
  • Page 2 Step 2: Attach the Legs (P2), (P3) to the Chair (P1) as shown below. (H1)x8 Bolts 5/16"x 51mm (H2)x8 Lock Washers 5/16" (H3)x8 Flat Washers 5/16" Alen Wrench (H4)x1 Step 3: Turn the chair over and place it upright on a level surface. Assembly is complete.